问题描述:

`0.1 + 0.2 == 0.3`

-> false

`0.1 + 0.2`

-> 0.30000000000000004

Why does this happen?

Binary floating point math is like this. In most programming languages, it is based on the IEEE 754 standard. JavaScript uses 64-bit floating point representation, which is the same as Java's `double`

. The crux of the problem is that numbers are represented in this format as a whole number times a power of two; rational numbers (such as `0.1`

, which is `1/10`

) whose denominator is not a power of two cannot be exactly represented.

For `0.1`

in the standard `binary64`

format, the representation can be written exactly as

`0.1000000000000000055511151231257827021181583404541015625`

in decimal, or`0x1.999999999999ap-4`

in C99 hexfloat notation.

In contrast, the rational number `0.1`

, which is `1/10`

, can be written exactly as

`0.1`

in decimal, or`0x1.99999999999999...p-4`

in an analogue of C99 hexfloat notation, where the`...`

represents an unending sequence of 9's.

The constants `0.2`

and `0.3`

in your program will also be approximations to their true values. It happens that the closest `double`

to `0.2`

is larger than the rational number `0.2`

but that the closest `double`

to `0.3`

is smaller than the rational number `0.3`

. The sum of `0.1`

and `0.2`

winds up being larger than the rational number `0.3`

and hence disagreeing with the constant in your code.

A fairly comprehensive treatment of floating-point arithmetic issues is *What Every Computer Scientist Should Know About Floating-Point Arithmetic*. For an easier-to-digest explanation, see floating-point-gui.de.

I believe I should add a hardware designer’s perspective to this since I design and build floating point hardware. Knowing the origin of the error may help in understanding what is happening in the software, and ultimately, I hope this helps explain the reasons for why floating point errors happen, and seem to accumulate over time.

From an engineering perspective, most floating point operations will have some element of error since the hardware that does the floating point computations is only required to have an error of less than one half of one unit in the last place. Therefore, much hardware will stop at a precision that's only necessary to yield an error of less than one half of one unit in the last place for a *single operation* which is especially problematic in floating point division. What constitutes a single operation depends upon how many operands the unit takes. For most, it is two, but some units take 3 or more operands. Because of this, there is no guarantee that repeated operations will result in a desirable error since the errors add up over time.

Most processors follow the IEEE-754 standard but some use denormalized, or different standards . For example, there is a denormalized mode in IEEE-754 which allows representation of very small floating point numbers at the expense of precision. The following however, will cover the normalized mode of IEEE-754 which is the typical mode of operation.

In the IEEE-754 standard, hardware designers are allowed any value of error/epsilon as long as it's less than one half of one unit in the last place, and the result only has to be less than one half of one unit in the last place for one operation. This explains why when there are repeated operations, the errors add up. For IEEE-754 double precision, this is the 54th bit, since 53 bits are used to represent the numeric part (normalized), also called the mantissa, of the floating point number (e.g. the 5.3 in 5.3e5). The next sections go into more detail on the causes of hardware error on various floating point operations.

The main cause of the error in floating point division, are the division algorithms used to calculate the quotient. Most computer systems calculate division using multiplication by an inverse, mainly in `Z=X/Y`

, `Z = X * (1/Y)`

. Division is computed iteratively i.e. each cycle computes some bits of the quotient until the desired precision is reached, which for IEEE-754 is anything with an error of less than one unit in the last place. The table of reciprocals of Y (1/Y) is known as the quotient selection table (QST) in slow division, and the size in bits of the quotient selection table is usually the width of the radix, or number of bits of the quotient computed in each iteration, plus a few guard bits. For the IEEE-754 standard, double precision (64-bit), it would be the size of the radix of the divider, plus a few guard bits k, where `k>=2`

. So for example, a typical Quotient Selection Table for a divider that computes 2 bits of the quotient at a time (radix 4) would be `2+2= 4`

bits (plus a few optional bits).

**3.1 Division Rounding Error: Approximation of Reciprocal**

What reciprocals are in the quotient selection table depend on the division method: slow division such as SRT division, or fast division such as Goldschmidt division; each entry is modified according to the division algorithm in an attempt to yield the lowest possible error. In any case though, all reciprocals are *approximations* of the actual reciprocal, and introduce some element of error. Both slow division and fast division methods calculate the quotient iteratively, i.e. some number of bits of the quotient are calculated each step, then the result is subtracted from the dividend, and the divider repeats the steps until the error is less than one half of one unit in the last place. Slow division methods calculate a fixed number of digits of the quotient in each step and are usually less expensive to build, and fast division methods calculate a variable number of digits per step and are usually more expensive to build. The most important part of the division methods is that most of them rely upon repeated multiplication by an *approximation* of a reciprocal, so they are prone to error.

Another cause of the rounding errors in all operations are the different modes of truncation of the final answer that IEEE-754 allows. There's truncate, round-towards-zero, round-to-nearest (default), round-down, and round-up. All methods introduce an element of error of less than one unit in the last place for a single operation. Over time and repeated operations, truncation also adds cumulatively to the resultant error. This truncation error, is especially problematic in exponentiation, which involves some form of repeated multiplication.

Since the hardware that does the floating point calculations only needs to yield a result with an error of less than one half of one unit in the last place for a single operation, the error will grow over repeated operations if not watched. This is the reason that in computations that require a bounded error, mathematicians use methods such as using the round-to-nearest even digit in the last place of IEEE-754, because over time, the errors are more likely to cancel each other out, and Interval Arithmetic combined with variations of the IEEE 754 rounding modes to predict rounding errors, and correct them. Because of its low relative error compared to other rounding modes, round to nearest even digit (in the last place), is the default rounding mode of IEEE-754.

Note that the default rounding mode, round-to-nearest even digit in the last place, guarantees an error of less than one half of one unit in the last place for one operation. Using the truncation, round-up, and round down alone may result in an error that is greater than one half of one unit in the last place, but less than one unit in the last place, so these modes are not recommended unless they are used in Interval Arithmetic.

In short, the fundamental reason for the errors in floating point operations is a combination of the truncation in hardware, and the truncation of a reciprocal in the case of division. Since the IEEE-754 standard only requires an error of less than one half of one unit in the last place for a single operation, the floating point errors over repeated operations will add up unless corrected.

When you convert .1 or 1/10 to base 2 (binary) you get a repeating pattern after the decimal point, just like trying to represent 1/3 in base 10. The value is not exact, and therefore you can't do exact math with it using normal floating point methods.

Floating point rounding errors. 0.1 cannot be represented as accurately in base-2 as in base-10 due to the missing prime factor of 5. Just as 1/3 takes an infinite number of digits to represent in decimal, but is "0.1" in base-3, 0.1 takes an infinite number of digits in base-2 where it does not in base-10. And computers don't have an infinite amount of memory.

*Most answers here address this question in very dry, technical terms. I'd like to address this in terms that normal human beings can understand.*

Imagine that you are trying to slice up pizzas. You have a robotic pizza cutter that can cut pizza slices *exactly* in half. It can halve a whole pizza, or it can halve an existing slice, but in any case, the halving is always exact.

That pizza cutter has very fine movements, and if you start with a whole pizza, then halve that, and continue halving the smallest slice each time, you can do the halving *53 times* before the slice is too small for even its high-precision abilities. At that point, you can no longer halve that very thin slice, but must either include or exclude it as is.

Now, how would you piece all the slices in such a way that would add up to one-tenth (0.1) or one-fifth (0.2) of a pizza? Really think about it, and try working it out. You can even try to use a real pizza, if you have a mythical precision pizza cutter at hand. :-)

Most experienced programmers, of course, know the real answer, which is that there is no way to piece together an *exact* tenth or fifth of the pizza using those slices, no matter how finely you slice them. You can do a pretty good approximation, and if you add up the approximation of 0.1 with the approximation of 0.2, you get a pretty good approximation of 0.3, but it's still just that, an approximation.

For double-precision numbers (which is the precision that allows you to halve your pizza 53 times), the numbers immediately less and greater than 0.1 are 0.09999999999999999167332731531132594682276248931884765625 and 0.1000000000000000055511151231257827021181583404541015625. The latter is quite a bit closer to 0.1 than the former, so a numeric parser will, given an input of 0.1, favour the latter.

(The difference between those two numbers is the "smallest slice" that we must decide to either include, which introduces an upward bias, or exclude, which introduces a downward bias. The technical term for that smallest slice is an ulp.)

In the case of 0.2, the numbers are all the same, just scaled up by a factor of 2. Again, we favour the value that's slightly higher than 0.2.

Notice that in both cases, the approximations for 0.1 and 0.2 have a slight upward bias. If we add enough of these biases in, they will push the number further and further away from what we want, and in fact, in the case of 0.1 + 0.2, the bias is high enough that the resulting number is no longer the closest number to 0.3.

In particular, 0.1 + 0.2 is really 0.1000000000000000055511151231257827021181583404541015625 + 0.200000000000000011102230246251565404236316680908203125 = 0.3000000000000000444089209850062616169452667236328125, whereas the number closest to 0.3 is actually 0.299999999999999988897769753748434595763683319091796875.

P.S. Some programming languages also provide pizza cutters that can split slices into exact tenths. Although such pizza cutters are uncommon, if you do have access to one, you should use it when it's important to be able to get exactly one-tenth or one-fifth of a slice.

*(Originally posted on Quora.)*

In addition to the other correct answers, you may want to consider scaling your values to avoid problems with floating-point arithmetic.

For example:

```
var result = 1.0 + 2.0; // result === 3.0 returns true
```

... instead of:

```
var result = 0.1 + 0.2; // result === 0.3 returns false
```

The expression `0.1 + 0.2 === 0.3`

returns `false`

in JavaScript, but fortunately integer arithmetic in floating-point is exact, so decimal representation errors can be avoided by scaling.

As a practical example, to avoid floating-point problems where accuracy is paramount, it is recommended^{1} to handle money as an integer representing the number of cents: `2550`

cents instead of `25.50`

dollars.

^{1} Douglas Crockford: **JavaScript: The Good Parts**: Appendix A - Awful Parts (page 105).

A solution to tidy up the unsightly overflow,

```
function strip(number) {
return (parseFloat(number.toPrecision(12)));
}
```

Using `toPrecision(12)`

leaves trailing zeros which `parseFloat()`

removes. Assume it is accurate to plus/minus one on the least significant digit.

*My answer is quite long, so I've split it into three sections. Since the question is about floating point mathematics, I've put the emphasis on what the machine actually does. I've also made it specific to double (64 bit) precision, but the argument applies equally to any floating point arithmetic.*

**Preamble**

A IEEE 754 double-precision binary floating-point format (binary64) number represents a number of the form

value = (-1)^s * (1.m

_{51}m_{50}...m_{2}m_{1}m_{0})_{2}* 2^{e-1023}

in 64 bits:

- The first bit is the sign bit:
`1`

if the number is negative,`0`

otherwise^{1}. - The next 12 bits are the exponent, which is offset by 1023. In other words, after reading the exponent bits from a double-precision number, 1023 must be subtracted to obtain the power of two.
- The remaining 52 bits are the significand (or mantissa). In the mantissa, an 'implied'
`1.`

is always^{2}omitted since the most significant bit of any binary value is`1`

.

^{1} - IEEE 754 allows for the concept of a signed zero - `+0`

and `-0`

are treated differently: `1 / (+0)`

is positive infinity; `1 / (-0)`

is negative infinity. For zero values, the mantissa and exponent bits are all zero. Note: zero values (+0 and -0) are explicitly not classed as denormal^{2}.

^{2} - This is not the case for denormal numbers, which have an offset exponent of zero (and an implied `0.`

). The range of denormal double precision numbers is d_{min} ≤ |x| ≤ d_{max}, where d_{min} (the smallest representable nonzero number) is 2^{-1023 - 51} (≈ 4.94 * 10^{-324}) and d_{max} (the largest denormal number, for which the mantissa consists entirely of `1`

s) is 2^{-1023 + 1} - 2^{-1023 - 51} (≈ 2.225 * 10^{-308}).

**Turning a double precision number to binary**

Many online converters exist to convert a double precision floating point number to binary (e.g. at binaryconvert.com), but here is some sample C# code to obtain the IEEE 754 representation for a double precision number (I separate the three parts with colons (`:`

):

```
public static string BinaryRepresentation(double value)
{
long valueInLongType = BitConverter.DoubleToInt64Bits(value);
string bits = Convert.ToString(valueInLongType, 2);
string leadingZeros = new string('0', 64 - bits.Length);
string binaryRepresentation = leadingZeros + bits;
string sign = binaryRepresentation[0].ToString();
string exponent = binaryRepresentation.Substring(1, 11);
string mantissa = binaryRepresentation.Substring(12);
return string.Format("{0}:{1}:{2}", sign, exponent, mantissa);
}
```

**Getting to the point: the original question**

(Skip to the bottom for the TL;DR version)

@CatoJohnston (the question asker) asked why 0.1 + 0.2 != 0.3.

Written in binary (with colons separating the three parts), the IEEE 754 representations of the values are:

```
0.1 => 0:01111111011:1001100110011001100110011001100110011001100110011010
0.2 => 0:01111111100:1001100110011001100110011001100110011001100110011010
```

Note that the mantissa is composed of recurring digits of `0011`

. This is **key** to why there is any error to the calculations - 0.1, 0.2 and 0.3 cannot be represented in binary **precisely** in a *finite* number of binary bits any more than 1/9, 1/3 or 1/7 can be represented precisely in *decimal digits*.

Converting the exponents to decimal, removing the offset, and re-adding the implied `1`

(in square brackets), 0.1 and 0.2 are:

```
0.1 = 2^-4 * [1].1001100110011001100110011001100110011001100110011010
0.2 = 2^-3 * [1].1001100110011001100110011001100110011001100110011010
```

To add two numbers, the exponent needs to be the same, i.e.:

```
0.1 = 2^-3 * 0.1100110011001100110011001100110011001100110011001101(0)
0.2 = 2^-3 * 1.1001100110011001100110011001100110011001100110011010
sum = 2^-3 * 10.0110011001100110011001100110011001100110011001100111
```

Since the sum is not of the form 2^{n} * 1.{bbb} we increase the exponent by one and shift the decimal (*binary*) point to get:

```
sum = 2^-2 * 1.0011001100110011001100110011001100110011001100110011(1)
```

There are now 53 bits in the mantissa (the 53rd is in square brackets in the line above). The default rounding mode for IEEE 754 is '*Round to Nearest*' - i.e. if a number *x* falls between two values *a* and *b*, the value where the least significant bit is zero is chosen.

```
a = 2^-2 * 1.0011001100110011001100110011001100110011001100110011
x = 2^-2 * 1.0011001100110011001100110011001100110011001100110011(1)
b = 2^-2 * 1.0011001100110011001100110011001100110011001100110100
```

Note that *a* and *b* differ only in the last bit; `...0011`

+ `1`

= `...0100`

. In this case, the value with the least significant bit of zero is *b*, so the sum is:

```
sum = 2^-2 * 1.0011001100110011001100110011001100110011001100110100
```

**TL;DR**

Writing `0.1 + 0.2`

in a IEEE 754 binary representation (with colons separating the three parts) and comparing it to `0.3`

, this is (I've put the distinct bits in square brackets):

```
0.1 + 0.2 => 0:01111111101:0011001100110011001100110011001100110011001100110[100]
0.3 => 0:01111111101:0011001100110011001100110011001100110011001100110[011]
```

Converted back to decimal, these values are:

```
0.1 + 0.2 => 0.300000000000000044408920985006...
0.3 => 0.299999999999999988897769753748...
```

The difference is exactly 2^{-54}, which is ~5.5511151231258 × 10^{-17} - insignificant (for many applications) when compared to the original values.

Comparing the last few bits of a floating point number is inherently dangerous, as anyone who reads the famous "What Every Computer Scientist Should Know About Floating-Point Arithmetic" (which covers all the major parts of this answer) will know.

Most calculators use additional guard digits to get around this problem, which is how `0.1 + 0.2`

would give `0.3`

: the final few bits are rounded.

Floating point rounding error. From What Every Computer Scientist Should Know About Floating-Point Arithmetic:

Squeezing infinitely many real numbers into a finite number of bits requires an approximate representation. Although there are infinitely many integers, in most programs the result of integer computations can be stored in 32 bits. In contrast, given any fixed number of bits, most calculations with real numbers will produce quantities that cannot be exactly represented using that many bits. Therefore the result of a floating-point calculation must often be rounded in order to fit back into its finite representation. This rounding error is the characteristic feature of floating-point computation.

My workaround:

```
function add(a, b, precision) {
var x = Math.pow(10, precision || 2);
return (Math.round(a * x) + Math.round(b * x)) / x;
}
```

*precision* refers to the number of digits you want to preserve after the decimal point during addition.

Floating point numbers stored in the computer consist of two parts, an integer and an exponent that the base is taken to and multiplied by the integer part.

If the computer were working in base 10, `0.1`

would be `1 x 10⁻¹`

, `0.2`

would be `2 x 10⁻¹`

, and `0.3`

would be `3 x 10⁻¹`

. Integer math is easy and exact, so adding `0.1 + 0.2`

will obviously result in `0.3`

.

Computers don't usually work in base 10, they work in base 2. You can still get exact results for some values, for example `0.5`

is `1 x 2⁻¹`

and `0.25`

is `1 x 2⁻²`

, and adding them results in `3 x 2⁻²`

, or `0.75`

. Exactly.

The problem comes with numbers that can be represented exactly in base 10, but not in base 2. Those numbers need to be rounded to their closest equivalent. Assuming the very common IEEE 64-bit floating point format, the closest number to `0.1`

is `900719925474099 x 2⁻⁵³`

, and the closest number to `0.2`

is `1801439850948199 x 2⁻⁵³`

; adding them together results in `2702159776422298 x 2⁻⁵³`

, or an exact decimal value of `0.3000000000000000444089209850062616169452667236328125`

. Floating point numbers are generally rounded for display.

All numbers in JavaScript are represented in binary as IEEE-754 Doubles, which provides an accuracy to about 14 or 15 significant digits. Because they are floating point numbers, they do not always exactly represent real numbers, including fractions.

JavaScript syntax: Number

I found a solution you can use this function to parse floats correctly also you can set your own precision

```
function getFloat(int) {
var num = new Number(int);
return parseFloat(num.toPrecision(2));
}
```

Did you try the duct tape solution?

Try to determine when errors occur and fix them with short if statements, it's not pretty but for some problems it is the only solution and this is one of them.

```
if( (n * 0.1) < 100.0 ) { return n * 0.1 - 0.000000000000001 ;}
else { return n * 0.1 + 0.000000000000001 ;}
```

I had the same problem in a scientific simulation project in c#, and I can tell you that if you ignore the butterfly effect it's gonna turn to a big fat dragon and bite you in the a**

Summary

Floating point arithmetic *is* exact, unfortunately, it doesn't match up well with our usual base-10 number representation, so it turns out we are often giving it input that is slightly off from what we wrote.

Even simple numbers like 0.01, 0.02, 0.03, 0.04 ... 0.24 are not representable exactly as binary fractions, even if you had thousands of bits of precision in the mantissa, even if you had millions. If you count off in 0.01 increments, not until you get to 0.25 will you get the first fraction (in this sequence) representable in base_{10} and base_{2}. But if you tried that using FP, your 0.01 would have been slightly off, so the only way to add 25 of them up to a nice exact 0.25 would have required a long chain of causality involving guard bits and rounding. It's hard to predict so we throw up our hands and say *"FP is inexact".*

We constantly give the FP hardware something that seems simple in base 10 but is a repeating fraction in base 2.

How did this happen?

When we write in decimal, every fraction is a rational number of the form

*x / (2 ^{n} + 5^{n}).*

In binary, we only get the *2 ^{n}* term, that is:

*x / 2 ^{n}*

So in decimal, we can't represent ^{1}/_{3}. Because base 10 includes 2 as a prime factor, every number we can write as a binary fraction *also* can be written as a base 10 fraction. However, hardly anything we write as a base_{10} fraction is representable in binary. In the range from 0.01, 0.02, 0.03 ... 0.99, only *three* numbers can be represented in our FP format: 0.25, 0.50, and 0.75, because they are 1/4, 1/2, and 3/4, all numbers with a prime factor using only the 2^{n} term.

In base_{10} we can't represent ^{1}/_{3}. But in binary, we can't do ^{1}/_{10} *or* ^{1}/_{3}.

So while every binary fraction can be written in decimal, the reverse is not true. And in fact most decimal fractions repeat in binary.

Dealing with it

Developers are usually instructed to do *< epsilon* comparisons, better advice might be to round to integral values (in the C library: round() and roundf(), i.e., stay in the FP format) and then compare. Rounding to a specific decimal fraction length solves most problems with output.

Also, on real number-crunching problems (the problems that FP was invented for on early, frightfully expensive computers) the physical constants of the universe and all other measurements are only known to a relatively small number of significant figures, so the entire problem space was "inexact" anyway. FP "accuracy" isn't a problem in this kind of application.

The whole issue really arises when people try to use FP for bean counting. It does work for that, but only if you stick to integral values, which kind of defeats the point of using it. *This is why we have all those decimal fraction software libraries.*

I love the Pizza answer by Chris, because it describes the actual problem, not just the usual handwaving about "inaccuracy". If FP were simply "inaccurate", we could *fix* that and would have done it decades ago. The reason we haven't is because the FP format is compact and fast and it's the best way to crunch a lot of numbers. Also, it's a legacy from the space age and arms race and early attempts to solve big problems with very slow computers using small memory systems. (Sometimes, individual *magnetic cores* for 1-bit storage, but that's another story.)

Conclusion

If you are just counting beans at a bank, software solutions that use decimal string representations in the first place work perfectly well. But you can't do quantum chromodynamics or aerodynamics that way.

Those weird numbers appear because computers use binary(base 2) number system for calculation purposes, while we use decimal(base 10).

There are a majority of fractional numbers that cannot be represented precisely either in binary or in decimal or both. Result - A rounded up (but precise) number results.

A lot of good answers was been posted. But short answer is that not all decimal numbers are the binary representation of floating point numbers. For example, the number "0.2" will be represented as "0.200000003" in single precision in IEEE754 float point standart.

Some statistics related to this famous double precision question. I used this code.

When adding all values (a+b) using a step of 0.1 (from 0.1 to 100) we have **~15% chance of precision error**.
Here are some examples (for full .txt results here):

```
0.1 + 0.2 = 0.30000000000000004
0.1 + 0.7 = 0.7999999999999999
...
1.7 + 1.9 = 3.5999999999999996
1.7 + 2.2 = 3.9000000000000004
...
3.2 + 3.6 = 6.800000000000001
3.2 + 4.4 = 7.6000000000000005
```

When subtracting all values (a-b where a>b) using a step of 0.1 (from 100 to 0.1) we have **~34% chance of precision error**.
Here are some examples (for full .txt results here):

```
0.6 - 0.2 = 0.39999999999999997
0.5 - 0.4 = 0.09999999999999998
...
2.1 - 0.2 = 1.9000000000000001
2.0 - 1.9 = 0.10000000000000009
...
100 - 99.9 = 0.09999999999999432
100 - 99.8 = 0.20000000000000284
```

*I was surprised with these 15% and 34%.. they are huge, so always use BigDecimal when precision is of big importance. With 2 decimal digits (step 0.01) the situation worsens a bit more (18% and 36%).

To cut a long story short...

For those who are using Java and having problems like that: **Use the BigDecimal class.**

Given that nobody has mentioned this...

Some high level languages such as Python and Java come with tools to overcome binary floating point limitations. For example:

Python's

`decimal`

module and Java's`BigDecimal`

class, that represent numbers internally with decimal notation (as opposed to binary notation). Both have limited precision, so they are still error prone, however they solve most common problems with binary floating point arithmetic.Decimals are very nice when dealing with money: ten cents plus twenty cents are always exactly thirty cents:

`>>> 0.1 + 0.2 == 0.3 False >>> Decimal('0.1') + Decimal('0.2') == Decimal('0.3') True`

Python's

`decimal`

module is based on IEEE standard 854-1987.Python's

`fractions`

module and Apache Common's`BigFraction`

class. Both represent rational numbers as`(numerator, denominator)`

pairs and they may give more accurate results than decimal floating point arithmetic.

Neither of these solutions is perfect (especially if we look at performances, or if we require a very high precision), but still they solve a great number of problems with binary floating point arithmetic.

Almost everyone has explained and answered correctly with different points of view on why this happens. If you ever need to actually work with decimals with Javascript and not fall into this issues, you can use Big.js module: https://github.com/MikeMcl/big.js. It allows you to perform operations with arbitrary-precision decimal arithmetic.

```
var Big = require('big.js');
x = Big(.1);
console.log(x.plus(.2).toString());
```

The result returns `0.3`

Can I just add; people always assume this to be a computer problem, but if you count with your hands (base 10), you can't get `(1/3+1/3=2/3)=true`

unless you have infinity to add 0.333... to 0.333... so just as with the 0.1 problem in base 2, you truncate it to 0.333 + 0.333 = 0.666 and probably round it to 0.667 which would be also be technically inaccurate.

Count in ternary, and thirds are not a problem though - maybe some race with 15 fingers on each hand would ask why your decimal math was broken...

For those reading through this thread looking to get precision to a specific number of decimal places and not numbers, instead of **num.toPrecision(2)** you can use **num.toFixed(2)**.

Many of this question's numerous duplicates ask about the effects of floating point rounding on specific numbers. In practice, it is easier to get a feeling for how it works by looking at exact results of calculations of interest rather than by just reading about it. Some languages provide ways of doing that - such as converting a `float`

or `double`

to `BigDecimal`

in Java.

Since this is a language-agnostic question, it needs language-agnostic tools, such as a Decimal to Floating-Point Converter.

Applying it to the numbers in the question, treated as doubles:

0.1 converts to 0.1000000000000000055511151231257827021181583404541015625,

0.2 converts to 0.200000000000000011102230246251565404236316680908203125,

0.3 converts to 0.299999999999999988897769753748434595763683319091796875, and

0.30000000000000004 converts to 0.3000000000000000444089209850062616169452667236328125.

Adding the first two numbers manually or in a decimal calculator such as Full Precision Calculator, shows the exact sum of the actual inputs is 0.3000000000000000166533453693773481063544750213623046875.

If it were rounded down to the equivalent of 0.3 the rounding error would be 0.0000000000000000277555756156289135105907917022705078125. Rounding up to the equivalent of 0.30000000000000004 also gives rounding error 0.0000000000000000277555756156289135105907917022705078125. The round-to-even tie breaker applies.

Returning to the floating point converter, the raw hexadecimal for 0.30000000000000004 is 3fd3333333333334, which ends in an even digit and therefore is the correct result.

The kind of floating-point math that can be implemented in a digital computer necessarily uses an approximation of the real numbers and operations on them. (The *standard* version runs to over fifty pages of documentation and has a committee to deal with its errata and further refinement.)

This approximation is a mixture of approximations of different kinds, each of which can either be ignored or carefully accounted for due to its specific manner of deviation from exactitude. It also involves a number of explicit exceptional cases at both the hardware and software levels that most people walk right past while pretending not to notice.

If you need infinite precision (using the number π, for example, instead of one of its many shorter stand-ins), you should write or use a symbolic math program instead.

But if you're okay with the idea that sometimes floating-point math is fuzzy in value and logic and errors can accumulate quickly, and you can write your requirements and tests to allow for that, then your code can frequently get by with what's in your FPU.

Just for fun, I played with the representation of floats, following the definitions from the Standard C99 and I wrote the code below.

The code prints the binary representation of floats in 3 separated groups

```
SIGN EXPONENT FRACTION
```

and after that it prints a sum, that, when summed with enough precition, it will show the value that really exists in hardware.

So when you write `float x = 999...`

, the compiler will transform that number in a bit representation printed by the function `xx`

such that the sum printed by the function `yy`

be equal to the given number.

In reality, this sum is only an approximation. For the number 999,999,999 the compiler will insert in bit representation of the float the number 1,000,000,000

After the code I attach a console session, in which I compute the sum of terms for both constants (minus PI and 999999999) that really exists in hardware, inserted there by the compiler.

```
#include <stdio.h>
#include <limits.h>
void
xx(float *x)
{
unsigned char i = sizeof(*x)*CHAR_BIT-1;
do {
switch (i) {
case 31:
printf("sign:");
break;
case 30:
printf("exponent:");
break;
case 23:
printf("fraction:");
break;
}
char b=(*(unsigned long long*)x&((unsigned long long)1<<i))!=0;
printf("%d ", b);
} while (i--);
printf("\n");
}
void
yy(float a)
{
int sign=!(*(unsigned long long*)&a&((unsigned long long)1<<31));
int fraction = ((1<<23)-1)&(*(int*)&a);
int exponent = (255&((*(int*)&a)>>23))-127;
printf(sign?"positive" " ( 1+":"negative" " ( 1+");
unsigned int i = 1<<22;
unsigned int j = 1;
do {
char b=(fraction&i)!=0;
b&&(printf("1/(%d) %c", 1<<j, (fraction&(i-1))?'+':')' ), 0);
} while (j++, i>>=1);
printf("*2^%d", exponent);
printf("\n");
}
void
main()
{
float x=-3.14;
float y=999999999;
printf("%lu\n", sizeof(x));
xx(&x);
xx(&y);
yy(x);
yy(y);
}
```

Here is a console session in which I compute the real value of the float that exists in hardware. I used bc to print the sum of terms outputted by the main program. One can insert that sum in python repl or something similar also.

```
-- .../terra1/stub
@ qemacs f.c
-- .../terra1/stub
@ gcc f.c
-- .../terra1/stub
@ ./a.out
sign:1 exponent:1 0 0 0 0 0 0 fraction:0 1 0 0 1 0 0 0 1 1 1 1 0 1 0 1 1 1 0 0 0 0 1 1
sign:0 exponent:1 0 0 1 1 1 0 fraction:0 1 1 0 1 1 1 0 0 1 1 0 1 0 1 1 0 0 1 0 1 0 0 0
negative ( 1+1/(2) +1/(16) +1/(256) +1/(512) +1/(1024) +1/(2048) +1/(8192) +1/(32768) +1/(65536) +1/(131072) +1/(4194304) +1/(8388608) )*2^1
positive ( 1+1/(2) +1/(4) +1/(16) +1/(32) +1/(64) +1/(512) +1/(1024) +1/(4096) +1/(16384) +1/(32768) +1/(262144) +1/(1048576) )*2^29
-- .../terra1/stub
@ bc
scale=15
( 1+1/(2) +1/(4) +1/(16) +1/(32) +1/(64) +1/(512) +1/(1024) +1/(4096) +1/(16384) +1/(32768) +1/(262144) +1/(1048576) )*2^29
999999999.999999446351872
```

That's it. The value of 999999999 is in fact

```
999999999.999999446351872
```

You can also check with `bc`

that -3.14 is also perturbed. Do not forget to set a `scale`

factor in `bc`

.

The displayed sum is what inside the hardware. The value you obtain by computing it depends on the scale you set. I did set the `scale`

factor to 15. Mathematically, with infinite precision, it seems it is 1,000,000,000.

I took this from the PHP documentation:

http://php.net/manual/en/language.types.float.php#language.types.float.comparison

To test floating point values for equality, an upper bound on the relative error due to rounding is used. This value is known as the machine epsilon, or unit roundoff, and is the smallest acceptable difference in calculations.

$a and $b are equal to 5 digits of precision.

```
<?php
$a = 1.23456789;
$b = 1.23456780;
$epsilon = 0.00001;
if(abs($a-$b) < $epsilon) {
echo "true";
}
```

http://jsfiddle.net/ozbob/y4rak722/5/

```
var foo = 0.1;
var bar = 0.2;
function add(foo, bar, precision){
return parseFloat((foo + bar).toFixed(precision));
}
```

Yes, it's BROKEN, I include an example with simple solution to common mistakes/errors..

**Check the first function(wrong result).**

```
var result = myBinaryFunction (); // The result contains **0.06999999999999999**
myBinaryFunction (){
var x = 0.01 + 0.06;
return x;
}
```

**Check the Second function (correct result).**

```
var result = myParsedFunction() // The result contains 0.07
function myParsedFunction() {
var x = parseFloat(0.01) + parseFloat(0.06);
return x.toFixed(2);
}
```

The reason for not having the incorrect result is because the Javascript compiler finds floating point numbers as binary numbers, they do not always exactly represent real numbers, including fractions.

您可能感兴趣的文章：

- css3 - Bootstrap 3 - Replace button on mobile view
- android - Force Full Screen Input to EditText
- c# - How to group apps in Metro in a similar way to a web app?
- javascript - How to add background image to <area> tags for pins on a map
- How to overcome memory issues in ADOconnection in inno setup
- php - Reading a specific line from a text file
- clr - Any implementation of an Unrolled Linked List in C#?
- Finding Hudson Log Files
- Forward to a payment-gateway together with POST data using cURL (or any other PHP server side solution)
- WCF in Winforms app - is it always single-threaded?

随机阅读：

**推荐内容**-

**热点内容**-
- php - Reading a specific line from a text file
- clr - Any implementation of an Unrolled Linked List in C#?
- Finding Hudson Log Files
- Forward to a payment-gateway together with POST data using cURL (or any other PHP server side solution)
- WCF in Winforms app - is it always single-threaded?
- git svn - git svn fetch does not fetch a Subversion commit message modified after initial clone
- java me - Why I am getting the bad length exception when I am running this application?
- java - How to get string.format to complain at compile time
- ruby on rails - Trigger observer of parent class on change
- python - Issue with URL pattern in Django with webmonkey tutorial