1、quartus_warning_altera_reserved_tck

来源:转载

编译的时候没有注意,整个工程都可以在板子上跑起来。但是做Powerplay的时候,出现了这个Critical Warning:、

Critical Warning: The following clock transfers have no clock uncertainty assignment. For more accurate results, apply clock uncertainty assignments or use the derive_clock_uncertainty command.
Critical Warning: From altera_reserved_tck (Rise) to altera_reserved_tck (Rise) (setup and hold)
Critical Warning: From altera_reserved_tck (Rise) to altera_reserved_tck (Fall) (setup and hold)
Critical Warning: From altera_reserved_tck (Fall) to altera_reserved_tck (Fall) (setup and hold)

参考了很多文献。Altera上说是时序问题,并提供了如下解决方法:

Solution

The altera_reserved_tck pin is automatically generated for a design that uses a JTAG accessible module such as the SignalTap? II logic analyzer, the In-System Memory Content Editor or the Nios? II debugger.

To constrain this JTAG clock, apply a 10-MHz clock constraint to this pin.

For the TimeQuest Timing Analyzer, use the following command:


create_clock -period "100.000 ns" -name {altera_reserved_tck} {altera_reserved_tck}

For the Quartus? II Classic Timing Analyzer, use the following command:


set_global_assignment -name FMAX_REQUIREMENT "10 MHz" -section_id altera_reserved_tck
set_instance_assignment -name CLOCK_SETTINGS altera_reserved_tck -to altera_reserved_tck

Any datapaths crossing into the altera_reserved_tck clock domain from another domain can be set as false paths. Similarly any datapaths crossing from the altera_reserved_tck domain to another domain can also be set as false paths.

好像有些人用了这个方法之后有效果。但是我的没有效果。有另外搜索了好多。实验了很多次,尽管使用的命令各不相同,但是大家一致认为这个事是时序约束没做好的问题,跟使用JTAG有关系。最后找到一片博文:http://blog.sina.com.cn/s/blog_436c7ed30100lu1q.html

我很欣赏博主的“依样画葫芦”的精神,跟我太像了。说实话这个精神救了很多人,害了整个国家。但是这并不影响我再一次“依样画葫芦”:


set_clock_uncertainty  -setup -rise_from altera_reserved_tck -rise_to altera_reserved_tck 0.150
set_clock_uncertainty  -hold -rise_from altera_reserved_tck -rise_to altera_reserved_tck 0.150

set_clock_uncertainty  -setup -rise_from altera_reserved_tck -fall_to altera_reserved_tck 0.150
set_clock_uncertainty  -hold -rise_from altera_reserved_tck -fall_to altera_reserved_tck 0.150

set_clock_uncertainty  -setup -fall_from altera_reserved_tck -fall_to altera_reserved_tck 0.150
set_clock_uncertainty  -hold -fall_from altera_reserved_tck -fall_to altera_reserved_tck 0.150

这几句话添加上去,就没有Warning了。希望看到这篇文章的牛人,留言批评一下,告诉我应该在哪里弄清楚这些东西呢?


分享给朋友:
您可能感兴趣的文章:
随机阅读: